Key takeaways
- Compare five trail camera mounts - screw-in, strap, T-post and ground stake designs - by thread size, rotation, tilt range, height and mounting surface.
A trail camera is only as useful as its placement. The strap bundled in the box holds a camera flat against a trunk, but it cannot correct for a leaning tree, an angled approach trail, or a scrape watched from above. A dedicated mount adds a threaded stud, a rotating head, and a real tilt range, so the lens points where animals actually walk instead of wherever the bark happens to face.
The five mounts below cover the four ways a trail camera is usually fixed in place: screwing into a tree, strapping around one, clamping onto a fence post, and staking into open ground. Every pick uses the standard 1/4″-20 camera thread, and each was chosen from published specifications on adjustment range, construction, and mounting surface, across budget, mid-range, and premium tiers.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
The HME Better Trail Camera Holder is the safest all-round pick: it screws into a trunk, rotates a full circle, and tilts for downward angles. For open ground, the Stealth Cam Mounting Post adds height and a second mount. Strap, T-post, and ground-stake options below cover spots where screws or trees are not an option.
1. HME Products Better Trail Camera Holder – Best Screw-In Tree Mount
The Better Trail Camera Holder, model BTCH, is the mount that long-running camera sets tend to end up on. A super-sharp screw tip starts into bark by hand and draws the steel arm tight against the trunk, holding the camera slightly off the tree so the housing door can swing open for card and battery swaps. The camera head rotates a full 360 degrees and tilts up and down through 120 degrees, which is enough to aim down a slope or level the frame on a tree that leans.
A wingnut under the head releases the camera without unthreading the mount from the tree, so seasonal repositioning takes seconds. The design fits any trail camera with a 1/4″-20 threaded insert in the bottom of the housing, the standard fitting on most cameras. The trade-off is the screw itself: it leaves a hole in the tree, so this is a private-land tool in many areas, and it offers no benefit on the treeless plots where a ground mount is needed instead.
Specs:
- Mount type: Screw-in tree mount
- Camera thread: 1/4″-20 threaded stud
- Rotation: 360 degrees
- Tilt: 120 degrees up and down
- Model number: BTCH (HME-BTCH)
- Finish: Olive
- Package dimensions: 7 x 8 x 2 inches
2. WINBUYGO Trail Camera Mount with Adjustable Strap – Best No-Drill Option
Where screws are banned or the timber is not yours to drill, a strap mount is the practical answer. The WINBUYGO mount wraps an adjustable webbing strap around a trunk, post, or wall and cinches the bracket tight, leaving no hole behind. The camera rides on a 1/4 inch threaded head that can be angled before the strap is fully tensioned, giving more aim control than a camera strapped flat to bark.
The listing also rates the bracket for solar panels and monitors, so the same hardware can hold a small power panel beside the camera. Because nothing penetrates the tree, this is the natural pick for public land, leased ground, and short scouting sets. The compromise is rigidity: a strap can creep on smooth or wet bark, and it is less planted in high wind than a screw-in mount or steel post, so it suits shorter sets and sheltered spots best.
Specs:
- Mount type: Strap mount for trees and walls
- Camera thread: 1/4 inch
- Strap: Adjustable webbing strap included
- Compatibility: Trail cameras, solar panels, and monitors
- Model name: Trail Camera Mount
- UPC: 761312594686
3. HME T-Post Trail Camera Holder – Best for Fence Lines
Fence lines concentrate animal movement at crossings, gates, and gaps, and the T-Post Trail Camera Holder is built for exactly that structure. It clamps onto a standard steel T-post, turning an existing post into a camera station with no tree or digging required. The camera attaches on the familiar 1/4″-20 thread, and the included hardware pack – adjustable mount, metal washer, rubber washer, two wing nuts, and a threaded wing screw – lets the head be locked at the chosen angle.
At 7.2 ounces with a compact 7.3 x 5 x 1.3 inch profile, the holder is easy to carry in multiples along a fence run. It has been in the HME catalog since 2016, which makes replacement hardware simple to source. The limits: the camera sits at post height, and the available aim depends on how the post was driven, so a badly twisted post narrows the useful adjustment. It does nothing away from existing fencing.
Specs:
- Mount type: T-post (fence post) clamp mount
- Camera thread: 1/4″-20
- Dimensions: 7.3 x 5 x 1.3 inches
- Weight: 7.2 ounces
- Included hardware: Adjustable mount, metal washer, rubber washer, two wing nuts, threaded wing screw
- Model number: TPCH
4. Adfitjo Game & Trail Camera Mount – Best Folding Ground Stake
For watching a waterhole, a mineral site, or garden wildlife at ground level, the Adfitjo ground mount pushes a stake into the soil and holds the camera just above the ground on a 360-degree adjustable head. The bracket is stainless steel with a thickened, collapsible design, so it folds flat for transport, and the universal screw connection uses the standard 1/4″-20 (6 mm) thread shared by trail cameras, solar panels, and action cameras.
The low stance is the point: small mammals, ground birds, and amphibians cross the frame at their own height, and a ground-level camera is easy to camouflage in grass or leaf litter. The same low stance is the limitation. The stake needs soil it can bite into, so rocky or frozen ground defeats it, and the camera sits within reach of curious animals. In soft, open ground where no trunk or post exists, though, it solves a placement problem tree mounts cannot touch, at the budget end of the range.
Specs:
- Mount type: Ground stake mount
- Camera thread: 1/4″-20 (6 mm) universal screw connection
- Adjustment: 360-degree rotating head
- Construction: Stainless steel bracket, collapsible folding design
- Compatibility: Trail cameras, solar panels, and action cameras
- First listed: November 2023
5. Stealth Cam Camera and Solar Pak Mounting Post – Best Adjustable Ground Post
The Stealth Cam Mounting Post, model STC-CSMP, is the premium answer for treeless ground. Its steel post adjusts from 29 to 49 inches, lifting a camera above brush, grass, and shrubs so the detection zone stays clear, and the multi-pivot head gives 360 degrees of pivot with 180 degrees of tilt for aiming along a trail. The camera connects on a standard 1/4 inch tripod thread.
What separates it from a simple stake is the second modular mount, which carries an additional camera facing another direction or a Sol-Pak solar battery pack beside the first camera. That makes it a small station rather than a single-camera perch, suited to food plot edges, field corners, and garden boundaries watched all season. The costs are visibility and carry weight: a steel post stands out where a strapped camera disappears, so pair it with a cable lock, and expect more to haul than a folding stake on a long walk in.
Specs:
- Mount type: Ground mounting post
- Height range: 29 to 49 inches, adjustable
- Camera thread: 1/4 inch tripod thread
- Adjustment: 360-degree pivot, 180-degree tilt
- Construction: Steel
- Extra mount: Second modular mount for an additional camera or Sol-Pak solar battery pack
- Model number: STC-CSMP
How to choose
Match the mount to the surface first. A mount is defined by what it grips: bark, a strap’s circumference, a steel T-post, or soil. If there is a straight trunk within range of the trail, a screw-in or strap mount works. On fence lines, a T-post holder uses existing structure. In open plots and gardens, only a ground stake or post will do.
Check the thread. Nearly every trail camera carries a 1/4″-20 threaded insert in the base, and all five mounts above use that standard. A few cameras rely on strap slots alone, so confirm the insert exists before choosing a threaded mount.
Compare adjustment ranges, not just attachment. Rotation figures are similar across brands, but tilt is where mounts differ: 120 degrees on the HME Better holder, 180 degrees on the Stealth Cam post. Steep downward angles from high placements need the larger tilt range.
Respect the rules of the land. Many public-land agencies prohibit screws and nails in trees. On managed land, the strap mount is the compliant choice; on private timber, screw-in mounts are faster and steadier.
Plan height and power together. Ground mounts watch small animals best at ground level, while a post at full extension clears tall grass. If the camera runs on a solar panel, a dual-mount post keeps panel and camera on one station instead of two.
Who should skip
Skip this category entirely if your camera lives on a feeder or mineral station that already has a built-in bracket, or if the included strap gives you the angle you need for short, close-to-home sets. Do not buy a mount as a security measure: none of these products locks a camera down, so on theft-prone ground a steel security box and a cable lock are the right purchase. Finally, if your mounting surface is a vehicle, a metal building, or a boat, look at clamp and magnetic mounts, since nothing here is designed for those surfaces.
FAQ
Do all trail cameras fit these mounts?
Nearly all do. The 1/4″-20 threaded insert in the base of the housing is the industry standard, and every mount in this guide uses it. A few ultra-compact or strap-only models omit the insert, so check the underside of your camera before ordering a threaded mount.
Are screw-in mounts allowed on public land?
Often not. Many state and federal land managers prohibit driving screws or nails into trees, and some private leases have the same rule. Where screw-in mounts are banned, a strap mount gives most of the aiming benefit without penetrating the bark.
How high should a trail camera be mounted?
Manufacturer guidance for deer-sized animals usually centers on roughly waist height with a slight downward tilt. Ground mounts break that rule on purpose for small animals, while a raised post or high screw-in placement suits overwatch of a plot or garden.
Can one mount hold a camera and a solar panel together?
Only the Stealth Cam Mounting Post here is built for that, with a second modular mount beside the main head. With the other mounts, the panel needs its own small bracket or strap nearby, which the WINBUYGO strap mount can also provide since its listing covers solar panels.
Final verdict
For most woodland sets, the HME Better Trail Camera Holder is the mount to buy first: fast to install, fully adjustable, and easy to strip of its camera for card swaps. Add the WINBUYGO strap mount for public or leased ground, the HME T-Post Holder where fences do the work, the Adfitjo stake for ground-level watching, and the Stealth Cam post where a treeless plot needs height and solar power in one station. Match the mount to the surface, and the camera finally points where you intended.
Read next
- Best Trail Camera Security Boxes: 5 Steel Lock Boxes
- Best Trail Cameras for Wildlife Monitoring: Top 5 Picks
- Best Camera Wrist Straps for Wildlife Photography Trips
- Best Camera Lens Mount Adapters for Sharp, Easy Shots
- Best Rocket Blowers for Camera Sensors: Top 5 Picks
- Best Rangefinders for Wildlife Photography: Top 5 Picks