Updated Nov 19, 2026· 9 min read

Key takeaways

  • Compare five Arca-Swiss quick release plates, lens plates and L-brackets for telephoto wildlife photography, with specs on length, stops and fit.

A long telephoto lens is only as secure as the small metal plate bolted beneath its foot. Wildlife photographers move between gimbal heads, ball heads, and monopods through a morning, often with cold hands and a subject that will not wait, so the plate has to slide in fast, lock without play, and hold a front-heavy lens in neutral balance. The Arca-Swiss dovetail is the shared standard for this job, yet plates differ widely in length, safety stops, screw layout, and fit.

This guide compares five Arca-Swiss options that cover the ways wildlife shooters mount their gear: a universal lens plate for collared telephotos, replacement feet and collars with the dovetail built in, and an L-bracket for body-based work. Each pick is matched to the lens or camera body it serves, with the published specifications that matter in the field, so the choice comes down to fit and balance rather than guesswork.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most wildlife shooters, the Wimberley P-20 is the safest universal lens plate: a double-dovetail design with dual safety stops that balances mid-size telephotos on gimbal and ball heads. Sony GM owners should pick the FocusFoto replacement foot, Canon EF shooters the iShoot collar, and Micro Four Thirds users the Haoge ring.

Wimberley P-20 Lens Plate

Check price on Amazon

The P-20 is the plate many long-lens kits are built around. At 3.86 inches long, it suits the collar feet of mid-size telephotos such as 70-200mm f/2.8 and 100-400mm class zooms, and it gives enough travel in a gimbal clamp to find the balance point when a teleconverter is added or removed. The double dovetail profile means the top face can also carry accessories that clamp from above, which keeps flash brackets off the lens barrel.

Wimberley machines the plate from anodized 6061 aluminum with stainless steel fasteners, and the low 0.4 inch profile keeps the lens sitting close to the tilt axis of the head. Dual safety stop screws guard against the plate sliding out of a partially opened clamp, a real concern when a rig is carried over one shoulder between hides. It sits in the premium tier, and the machining quality is the point.

Specs

  • Length: 3.86 in
  • Dimensions: 3.9 x 1.5 x 0.4 in
  • Weight: 2.5 oz
  • Material: Anodized 6061 aluminum, stainless steel fasteners
  • Profile: Double dovetail, Arca-Swiss style
  • Safety stops: Dual safety stop screws
  • Origin: Made in USA
  • Tier: Premium

FocusFoto Replacement Lens Foot for Sony GM Lenses

Check price on Amazon

Sony shooters with the 100-400mm GM, a classic wildlife zoom, gain nothing from stacking a plate under the factory foot. This FocusFoto foot replaces the original collar foot outright and carries the Arca-Swiss dovetail in its own base, removing one screw joint and one layer of height. It also fits both generations of the 70-200mm f/2.8 GM and the E PZ 18-110mm f/4 G, so one foot can rotate between lenses in the same system.

The foot is CNC machined from aviation aluminum and weighs 98 g. Two 1/4 inch and one 3/8 inch threaded holes in the base allow direct mounting on heads that are not Arca equipped, and dual safety stop screws are fitted at the ends of the dovetail. Because it is shaped for specific Sony GM collars, fit is exact rather than approximate. It is a budget tier part that solves a specific problem cleanly.

Specs

  • Compatibility: Sony FE 70-200mm f/2.8 GM OSS II, FE 70-200mm f/2.8 GM OSS, FE 100-400mm f/4.5-5.6 GM OSS, E PZ 18-110mm f/4 G OSS
  • Dimensions: 85 x 38 x 35 mm
  • Weight: 98 g
  • Material: CNC machined aviation aluminum
  • Mounting holes: Two 1/4 in and one 3/8 in threaded holes
  • Safety stops: Dual safety stop screws
  • Profile: Arca-Swiss standard dovetail
  • Model: SUNRJ043
  • Tier: Budget

iShoot IS-C720XB Lens Collar for Canon EF Telephotos

Check price on Amazon

Canon’s first-generation EF 100-400mm L and the EF 70-200mm f/2.8L family remain common in wildlife kits, and their original collars predate the Arca standard. The iShoot IS-C720XB is a complete replacement collar with a 65 mm Arca-Swiss plate integrated into its base, so the lens drops straight into any standard Arca clamp. It also fits the EF 300mm f/4L IS USM and the EF 35-350mm f/3.5-5.6L USM.

The collar is aviation aluminum, CNC machined with an anodized finish, and uses a copper knob with an anti-skid patch inside the ring. At about 135 g it adds little to the bag, and the 1/4 inch and 3/8 inch holes in the plate base keep it usable on non-Arca heads. For owners of these older L zooms, it is the simplest route to gimbal use without adapters stacked under the collar. It sits in the budget tier.

Specs

  • Compatibility: Canon EF 70-200mm f/2.8L USM, IS USM, IS II USM and IS III USM, EF 100-400mm f/4.5-5.6L IS USM, EF 35-350mm f/3.5-5.6L USM, EF 300mm f/4L IS USM
  • Built-in plate: 65 mm Arca-Swiss quick release plate, 39 mm standard
  • Threaded holes: 1/4 in and 3/8 in
  • Material: Aviation aluminum, CNC machined, anodized
  • Weight: About 135 g
  • Inner diameter: About 78 mm
  • Ring width: About 18 mm
  • Tier: Budget

Haoge LMR-OM415 Lens Collar Replacement Foot

Check price on Amazon

Micro Four Thirds is a serious wildlife system because of its reach advantage, and the Olympus M.ZUIKO 40-150mm f/2.8 PRO is one of its defining lenses. The Haoge LMR-OM415 replaces that lens’s mount ring with a collar whose foot is machined as an Arca-Swiss dovetail, so the lens mounts directly to Arca clamps on ball heads and gimbals. Haoge also lists the 90mm f/3.5 Macro IS PRO as compatible.

Thumbscrews tighten and loosen the ring, which makes it easy to rotate the lens between horizontal and vertical framing while it stays mounted. Reserved 1/4 inch and 3/8 inch screw holes at the bottom of the foot cover direct tripod mounting, and a built-in strap hole gives a carry point for a lens strap. The ring improves balance by supporting the lens rather than the smaller camera body. It is a mid-range tier accessory, and OM System shooters with the 40-150mm PRO are exactly its audience.

Specs

  • Compatibility: Olympus M.ZUIKO Digital ED 40-150mm f/2.8 PRO, 90mm f/3.5 Macro IS PRO
  • Profile: Built-in Arca-Swiss type dovetail foot
  • Threaded holes: 1/4 in and 3/8 in at the bottom of the foot
  • Adjustment: Thumbscrew ring tightening and loosening
  • Extras: Built-in strap hole
  • Weight: 6.7 oz
  • Model: LMR-OM415 US1
  • Tier: Mid-range

SUNWAYFOTO PCL-6DG L Plate for Canon EOS 6D

Check price on Amazon

Not every wildlife frame is made from the lens collar. For perch work, feeder setups, and landscape frames taken with shorter lenses, the camera body itself goes on the head, and that is where an L-bracket earns its place. The PCL-6DG is a custom L plate shaped for the Canon EOS 6D fitted with its battery grip, with Arca-Swiss dovetails on both the base and the side.

The two-axis design lets the camera move from horizontal to vertical on a ball head without dropping into the side notch, so the lens stays over the center of the tripod and composition barely shifts. A custom fit matters here: the bracket follows the body and grip contours, which resists twisting far better than a flat universal plate under a gripped body. For DSLR shooters who mix wildlife sessions with general outdoor work on the same body, it is a practical mid-range tier addition.

Specs

  • Compatibility: Canon EOS 6D with battery grip
  • Type: Custom-fit L-bracket
  • Dovetail: Arca-Swiss profile on base and side plates
  • Orientation: Horizontal and vertical mounting on Arca clamps
  • Fit: Shaped to the body and grip for anti-twist security
  • Tier: Mid-range

How to choose

Start with length. The plate must be at least as long as the lens foot, and longer is better on a gimbal, because the clamp needs travel to balance the rig at every zoom setting and with or without a teleconverter. A plate around four inches suits most 70-200mm and 100-400mm feet, while long super-telephoto primes benefit from the longest plates available.

Next, count the screws. Feet with two threaded holes should get a two-screw plate, since a single screw lets a heavy lens slowly rotate under its own weight. Single-hole feet need a plate with anti-twist nubs or a flange that registers against the foot. Then check safety stops: small screws at the plate ends stop it sliding through a clamp that has been knocked partly open, and they matter most with lever-release clamps.

Finally, decide between an add-on plate and a replacement foot or collar. A replacement part removes an interface, lowers the lens toward the head’s tilt axis, and has one less joint to work loose, but it fits only the lenses it was shaped for. A universal plate costs less to share across lenses. Whichever route you take, confirm your clamp is a true Arca-Swiss pattern, because proprietary systems such as RC2 use a different dovetail and are not interchangeable.

Who should skip

Skip this category if your head uses a proprietary clamp with no Arca conversion available, since none of these plates will lock into it. Handheld-only shooters gain nothing either; a plate adds a small amount of weight and a hard edge against the palm. Owners of lenses without tripod collars should look at camera body plates instead of lens plates. Video-led shooters on fluid heads with long sliding plates should also pass, because that system solves balance in its own way.

FAQ

Are all Arca-Swiss plates compatible with all Arca clamps?
Nearly all follow the same dovetail width, but machining tolerances vary between brands. Screw-knob clamps tolerate those small differences well. Lever-release clamps have a narrower adjustment range, so a plate and clamp from different makers can occasionally pair loosely or refuse to close.

How long should a plate be for a 150-600mm zoom?
Long enough that the clamp can grip well ahead of and behind the balance point across the whole zoom range, since extending the lens moves weight forward. In practice that means choosing one of the longer plates in the class and checking balance at full extension before a trip.

Do safety stop screws really matter for wildlife work?
Yes. Wildlife rigs are often carried mounted, tilted, or rested on a beanbag between bursts. If a clamp is bumped partly open, the stops are the last thing preventing a lens from sliding out and falling. They weigh almost nothing.

Is a replacement foot better than a plate under the stock foot?
For a lens you shoot often, usually yes. It removes a screw joint that can loosen, brings the lens closer to the head’s pivot for smoother gimbal movement, and gives an exact anti-twist fit. The trade-off is that it works only with the lenses it was made for.

Final verdict

For a shared, fit-anything solution, the Wimberley P-20 remains the reference lens plate for collared telephotos. Shooters who live on one system will get more from the dedicated parts: the FocusFoto foot for Sony GM glass, the iShoot collar for Canon EF L zooms, and the Haoge ring for the Olympus 40-150mm PRO. Add the SUNWAYFOTO PCL-6DG if a gripped 6D body also needs fast vertical work. Match the part to the foot, insist on safety stops, and the mount disappears from your thinking in the field.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Quick Release Plates for Wildlife PhotographyCheck price on Amazon