Key takeaways
- Discover the best camera dummy batteries for wildlife photography, with five AC adapter coupler kits for Canon, Nikon, and Sony cameras compared.
A dummy battery, also called a DC coupler, is a battery-shaped insert that sits in your camera’s battery compartment and connects by cable to an external power supply. It replaces the removable battery, so the camera runs on continuous mains power instead of draining a rechargeable cell. For wildlife photography, that matters most during the long, still hours in a hide: a time-lapse running from dawn to midday, or a session at a waterhole where swapping a battery would mean movement, noise, and a missed moment.
The five kits below cover the most common wildlife camera families: Canon LP-E6 and LP-E17, Nikon EN-EL15, and Sony NP-FZ100 and NP-FW50. Every kit here is an AC adapter kit that plugs into mains power, so a hide with mains access, a vehicle inverter, or a portable power station is its natural home. A truly remote setup with no power source still needs a spare battery or a power bank paired with a USB-C coupler instead.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Quick Answer
- How to Choose a Dummy Battery for Wildlife Photography
- Kimaru ACK-E6 DR-E6 Dummy Battery Kit for Canon LP-E6
- HY1C ACK-E18 DR-E18 Dummy Battery Kit for Canon LP-E17
- Kiri-Tek EP-5B Dummy Battery Kit for Nikon EN-EL15
- HY1C NP-FZ100 Dummy Battery Kit for Sony
- F1TP AC-PW20 NP-FW50 Dummy Battery Kit for Sony
- Who Should Skip a Dummy Battery
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
Quick Answer
For a Canon LP-E6 body such as the EOS R5, R6, or 90D, the Kimaru ACK-E6 kit is the most broadly compatible pick here. Canon LP-E17 shooters should look at the HY1C ACK-E18 kit, Nikon EN-EL15 shooters at the Kiri-Tek EP-5B kit, and Sony shooters at the HY1C NP-FZ100 kit for full-frame bodies or the F1TP AC-PW20 kit for NP-FW50 bodies. Always match the battery code printed on your existing battery to the coupler first.
How to Choose a Dummy Battery for Wildlife Photography
The battery code decides everything. Canon LP-E6, Canon LP-E17, Nikon EN-EL15, Sony NP-FZ100, and Sony NP-FW50 are different shapes, and a coupler made for one will not seat in a camera that takes another. Read the code printed on the battery already in your camera, then confirm your exact body appears on the kit’s compatibility list, since similar-sounding cameras can take different batteries.
Next, check the power source. All five kits here run from mains power through an AC adapter, so they suit a hide with a mains outlet, a vehicle inverter, or a portable power station. Plan the cable route before you buy: the coupler cable passes through the small slot in the battery compartment door, and the door must close fully for the camera to work. Finally, check the stated DC output in each table below.
Kimaru ACK-E6 DR-E6 Dummy Battery Kit for Canon LP-E6
The Kimaru ACK-E6 kit is the broadest Canon pick in this roundup. It replaces the Canon LP-E6, LP-E6N, and LP-E6NH batteries with a DR-E6 DC coupler and an AC power adapter, and its compatibility list covers the EOS R, R5, R6, R6 Mark II, and R7 mirrorless bodies, plus the 90D, 80D, 70D, 6D, 7D, and 5D Mark IV DSLRs. That breadth suits photographers running two Canon bodies on one battery type.
The listing gives an input rating of 100 to 240 volts at 0.6 amps and 50 to 60 hertz, and two DC output ratings: 7.6 volts at 2 amps and 8.0 volts at 3 amps. The kit contains the ACK-E6 power adapter and the LP-E6 dummy battery coupler. The listing notes the kit is not made for the Canon EOS R5 Mark II or the R6 Mark III.
Specs
| Specification | Detail |
|---|---|
| Brand | Kimaru |
| Replaces battery | Canon LP-E6, LP-E6N, LP-E6NH |
| Coupler | DR-E6 DC coupler |
| AC input | 100 to 240 volts, 0.6 amps, 50 to 60 hertz |
| DC output | 7.6 volts at 2 amps and 8.0 volts at 3 amps |
| Kit contents | ACK-E6 power adapter, LP-E6 dummy battery coupler |
| Compatible cameras | Canon EOS R, R5, R6, R6 Mark II, R7, 90D, 80D, 70D, 60D, 6D, 7D, 5D Mark IV, 5Ds R |
| Not compatible | Canon EOS R5 Mark II, R6 Mark III |
| Grouping | Mid-range |
HY1C ACK-E18 DR-E18 Dummy Battery Kit for Canon LP-E17
The HY1C ACK-E18 kit serves the other Canon battery family in this roundup: the LP-E17. That makes it the pick for Canon’s smaller bodies, including the EOS RP, R8, R10, R50, and R100 mirrorless cameras and the Rebel T6i, T7i, T8i, SL2, and SL3 DSLRs, along with the 77D, 200D, 250D, 750D, 800D, and 850D. These lighter bodies are often carried as a second camera, and their smaller batteries run down faster than the larger LP-E6 cells.
The adapter takes an AC input of 100 to 240 volts at 50 to 60 hertz and delivers a DC output of 8 volts at 3 amps. The DR-E18 coupler matches the LP-E17 battery, and the kit replaces the Canon LP-E17 battery and the ACK-E18 adapter set. This kit and the LP-E6 kit above look similar, but their couplers are different shapes: an LP-E17 camera cannot take the DR-E6 coupler, and an LP-E6 camera cannot take the DR-E18 coupler.
Specs
| Specification | Detail |
|---|---|
| Brand | HY1C |
| Replaces battery | Canon LP-E17 |
| Coupler | DR-E18 DC coupler |
| AC input | 100 to 240 volts, 50 to 60 hertz |
| DC output | 8 volts, 3 amps |
| Kit contents | AC power adapter, DR-E18 dummy battery coupler |
| Compatible cameras | Canon EOS RP, R8, R10, R50, R100, Rebel T6i, T7i, T8i, SL2, SL3, 77D, 200D, 250D, 750D, 800D, 850D |
| Grouping | Budget |
Kiri-Tek EP-5B Dummy Battery Kit for Nikon EN-EL15
The Kiri-Tek EP-5B kit is the Nikon option in this roundup, and it stands out for one feature none of the other four kits states: a voltage display on the adapter. The kit replaces the Nikon EN-EL15 and EN-EL15a batteries with an EP-5B DC coupler, and its compatibility list covers the Z5, Z6, Z6 II, Z7, and Z7 II mirrorless bodies, the D500, D750, D780, and D850 DSLRs, the D7000, D7100, D7200, and D7500 bodies, and the Nikon 1 V1. That range covers the Nikon bodies most often seen in wildlife hides, from the D500 to the Z6 II and Z7 II.
The adapter takes an AC input of 100 to 240 volts at 50 to 60 hertz and delivers a DC output of 9 volts at 3 amps through a barrel connector. The kit includes the power supply adapter, the EP-5B DC coupler, and a US plug AC cable. The listing states continuous power for video, photography, and long recording sessions, and it was first available on May 4, 2022. The voltage display confirms at a glance that the adapter is delivering power before a long session begins.
Specs
| Specification | Detail |
|---|---|
| Brand | Kiri-Tek |
| Replaces battery | Nikon EN-EL15, EN-EL15a |
| Coupler | EP-5B DC coupler |
| AC input | 100 to 240 volts AC, 50 to 60 hertz |
| DC output | 9 volts, 3 amps |
| Connector type | Barrel connector |
| Kit contents | Power supply adapter, EP-5B DC coupler, US plug AC cable |
| Special feature | Voltage display |
| Compatible cameras | Nikon Z5, Z6, Z6 II, Z7, Z7 II, D500, D750, D780, D850, D810, D7200, D7500, Nikon 1 V1 |
| Date first available | May 4, 2022 |
| Grouping | Mid-range |
HY1C NP-FZ100 Dummy Battery Kit for Sony
The HY1C NP-FZ100 kit is the full-frame Sony pick in this roundup. It replaces the Sony NP-FZ100 battery, the cell used across Sony’s full-frame mirrorless range, and its compatibility list includes the Alpha 7 III, Alpha 7 IV, Alpha 7R III, Alpha 7R IV, Alpha 7C, Alpha 6600, Alpha 9 II, and FX3. Sony’s full-frame bodies suit dawn and dusk wildlife work, the sessions where a battery runs down fastest.
The adapter takes an AC input of 100 to 240 volts at 50 to 60 hertz and delivers a DC output of 8.0 volts at 3.0 amps, rated at 24 watts, with an accuracy stated as within 5 percent. The coupler matches the NP-FZ100 battery one to one. The kit includes the AC adapter, the NP-FZ100 dummy battery, and the AC power cord, and it was first available on October 9, 2020. The kit is not compatible with the Sony A7 II, A7R II, A7S II, or the original ZV-E10, which take the smaller NP-FW50 battery covered by the next kit below.
Specs
| Specification | Detail |
|---|---|
| Brand | HY1C |
| Replaces battery | Sony NP-FZ100 |
| Coupler | NP-FZ100 DC coupler |
| AC input | 100 to 240 volts AC, 50 to 60 hertz |
| DC output | 8.0 volts, 3.0 amps, 24 watts |
| Output accuracy | Within 5 percent |
| Kit contents | AC power adapter, NP-FZ100 dummy battery, AC power cord |
| Compatible cameras | Sony Alpha 7 III, Alpha 7 IV, Alpha 7R III, Alpha 7R IV, Alpha 7C, Alpha 6600, Alpha 9 II, FX3 |
| Not compatible | Sony A7 II, A7R II, A7S II, ZV-E10 |
| Date first available | October 9, 2020 |
| Grouping | Mid-range |
F1TP AC-PW20 NP-FW50 Dummy Battery Kit for Sony
The F1TP AC-PW20 kit covers Sony’s other battery family, the NP-FW50, which powers the Alpha 6000 series, the original ZV-E10, the early Alpha 7 bodies, and the RX10 Mark II, III, and IV cameras. Its compatibility list includes the ZV-E10, Alpha 6000, 6100, 6300, 6400, 6500, 5000, 5100, A7, A7 II, A7R, A7S, and the RX10 II, III, and IV. It is not compatible with the Cybershot DSC-RX1, RX100, ZV1, A7 III, A7R III, A7S III, or ZV-E10 II.
The adapter takes an AC input of 100 to 240 volts at 50 to 60 hertz and delivers a DC output of 7.6 volts at 2 amps, rated at 15.2 watts, and the kit includes the AC-PW20 power adapter, the NP-FW50 dummy battery, and a US power cord. The listing states a cable length of 12 feet, the longest among the five kits here, so the adapter can sit on the floor or in a bag well away from the tripod. The listing was first available on July 21, 2017, the longest track record of any kit here.
Specs
| Specification | Detail |
|---|---|
| Brand | F1TP |
| Replaces battery | Sony NP-FW50 |
| Coupler | NP-FW50 DC coupler |
| AC input | 100 to 240 volts AC, 50 to 60 hertz |
| DC output | 7.6 volts, 2 amps, 15.2 watts |
| Cable length | 12 feet |
| Kit contents | AC-PW20 power adapter, NP-FW50 dummy battery, US power cord |
| Compatible cameras | Sony ZV-E10, Alpha 6000, 6100, 6300, 6400, 6500, 5000, 5100, A7, A7 II, A7R, A7S, RX10 II, RX10 III, RX10 IV |
| Not compatible | Sony Cybershot DSC-RX1, RX100, ZV1, A7 III, A7R III, A7S III, ZV-E10 II |
| Date first available | July 21, 2017 |
| Grouping | Budget |
Who Should Skip a Dummy Battery
A dummy battery is not right for every wildlife photographer. If you walk long distances between locations, work from a vehicle with no inverter, or set camera traps in remote spots, a cable tied to a mains adapter will hold you back more than a spare battery will. In those cases, carry extra rechargeable batteries, or use a USB-C coupler paired with a power bank. Also skip a dummy battery if your camera model does not appear on the kit’s compatibility list, even when the battery code matches, and if your hide has no mains outlet and no power station.
Frequently Asked Questions
What is a camera dummy battery?
A dummy battery, also called a DC coupler, is a battery-shaped insert that fits into the camera’s battery compartment and connects by cable to an external power supply. It contains no rechargeable cells of its own. Instead, it passes power from an AC adapter, a USB-C power source, or a D-Tap battery into the camera, so the camera runs for as long as the external supply lasts.
Will a dummy battery work with any camera?
No. A dummy battery is made for one battery family, such as Canon LP-E6, Nikon EN-EL15, or Sony NP-FZ100, and it only fits cameras that take that battery. Check the code printed on your existing battery, then check your exact camera model against the listing. Two cameras from the same brand can take different batteries.
Can I use a dummy battery in the field with no mains power?
An AC adapter kit needs mains power, a vehicle inverter, or a portable power station. For a remote hide or camera trap with no power source, use spare rechargeable batteries or a USB-C coupler paired with a power bank. The five kits here are all AC mains kits, so plan your power source before you buy.
Does a dummy battery charge the camera battery?
No. A dummy battery replaces the rechargeable battery rather than charging it. The camera runs directly from the external supply while the coupler is fitted. If you remove the coupler, the camera has no power until you fit a real battery again.
Conclusion
The best camera dummy battery is the one that matches your camera’s battery family and your hide’s power supply. Canon LP-E6 shooters get the widest compatibility from the Kimaru ACK-E6 kit, Canon LP-E17 shooters get a straightforward AC kit from HY1C, Nikon EN-EL15 shooters get a voltage display from Kiri-Tek, Sony NP-FZ100 shooters get a well-specified kit from HY1C, and Sony NP-FW50 shooters get the longest cable from F1TP. Check the battery code on your existing battery and confirm your exact body on the listing.
Read next